35-X PROFlexx®

Part #0015790

Ferno’s 35 PROFlexx®, X-Frame cot, has been carefully engineered to provide industry leading stability you need when transferring and transporting patients. A longer, fixed front leg in the X-Frame provides minimal flex and a low center of gravity at all heights. This means you may be less likely to flip or tip a cot during transfers and transport, reducing situations that may cause injury to you or your patient. The PROFlexx® can carry 700 lbs. in the transport position and up to 1100 lbs. in the lowest position.

#0015790

All Features and Benefits

  • Height minimum: 13.75 in/34.92 cm 
  • Length minimum: 64 in/162.56 cm 
Compliance
  • FAA form 8110—3 is available with supporting data to cover installations in specific aircraft
As produced Ferno Cots are not approved for aircraft installations and it is our policy to only supply stretchers to aircraft manufacturers, aircraft modification centers and other specialists who have the ability to perform aircraft installations and obtain approval of the installation under an FAA Supplemental Type Certificate (STC)

 Weight: Imperial (89 lb) | Metric (40.36 kg)
 LoadLimit: Imperial (700 lb) | Metric (317.51 kg)
 Width: Imperial (24 in) | Metric (60.96 cm )
 Height: Imperial (34 in) | Metric (86.36 cm )
 Length: Imperial (79 in) | Metric (200.66 cm )

 

Accessories

Fasteners

This item was added to your cart

This item was added to your quote

Something went wrong. Please try again.